|
Product Details:
|
| Material: | Aluminum Based Material | Specification: | Per Customer's Request |
|---|---|---|---|
| Suggested Thickness: | 3~5mm | Length: | According To Customers |
| Design Service: | YES | Shape: | Serpentine/Bent/Snake/Straight Shape |
| Surface Treatment: | Coating/Insulation/Film | Package: | Export Standard Packing |
| Processing: | Bending/Welding/Stamping/Extrusion/Coating | Key Words: | Snake Tube, Aluminum Cooling Plate, EV Battery Cooling |
| High Light: | 21700 Battery Liquid Cooling Tube,Water Cooled Extrusion Tube,18650 Battery Liquid Cooling Tube |
||
Custom Liquid Cooling Ribbon Water Cooled Extrusion Tube For 18650 21700 Battery Cells
Custom Liquid Cooling Ribbon Water Cooled Extrusion Tube for 18650 21700 battery cells
Liquid cooling is one of popular cooling methods for themal management system. Liquid cooling refers to cooling by means of the convection or circulation of a liquid.
Today we are talking about liquid cooling solution for EV/ESS battery.
We specilized in:
1) Stamping type cooling plate for prismatic cells / battery pack.
2) Extrusion snake tube for cylindrical cells, such as 21700, 18650, 3270, 4680 big cell.
3) Roll bonded cooling plate
Our Advantages:
1) Full solutions for battery cooling. (According to your module provide customized cooling plate)
2) Design service, we have R&D department, can do design finalization, flow and heat simulation.
3) CNC centre to make customized inlet/outlet connector.
4) Thermal Interface Material, such as thermal silicone pad, Insulation coating etc.
Chemical composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
| 1050 | ≤0.25 | ≤0.40 | ≤0.05 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.05 | ≤0.03 |
| 1100 | ≤0.95(Si+Fe) | 0.05~0.20 | ≤0.05 | -- | -- | ≤0.10 | --- | --- | |
| 3102 | ≤0.40 | ≤0.70 | ≤0.1 | 0.05~0.4 | --- | --- | ≤0.3 | --- | ≤0.10 |
It can be customized according to customers' request!
Mechanical Properties
| Alloy | Temper | Tensile Strength | Yeild Strength | Elongation |
| 1050 | O/F/H111/H112 | ≥65MPa | ≥200MPa | ≥25% |
| 1100 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
| 3102 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
| 3003 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
FAQ:
Q: Are you a trading company or manufacturer?
A: Yes,we are a factory with more than 10 years history in this industry.
Q: What is your terms of payment ?
A: Normally 30% TT in advance, balance paid before shipment.
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new molds and free samples (within 5 kg),;after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
Contact Person: Mr. Tracy
Tel: +8613584862808
Fax: 86-512-62538616
